Digital Electronics Corporation PL-FD210 Kurulum Kılavuzu - Sayfa 4

Disket Sürücü Digital Electronics Corporation PL-FD210 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Digital Electronics Corporation PL-FD210 7 sayfaları.

Sayfayı Yazdır

Installation

Be sure to use the following installation procedures to insure that the unit

is correctly installed.

Shock Danger! Be sure to disconnect the PL unit's power cord prior

to installing the PL-FD210.

• The PL-FD210 can only be installed in the PL-X900/X920 Series

• The PL-FD210 and FD-200 cannot be used at the same time.

FDD's Blank (Filler) Panel

WARNING

4-slot unit.

(Front of PL)

Front Maintenance Cover

Blank Panel

(Rear of PL)

When attaching this unit to a PL-7900/7920 Series unit, steps

4 and 5 are not required. Please continue from step 6.

1) Open the PL unit's front face

maintenance cover and re-

move the FDD's blank (filler)

panel.

2) Close the front maintenance

cover.

3) Unscrew the two attachment

screws from the PL unit's

rear face Blank Panel, and

remove the cover.

-4-