Digital Electronics Corporation PS-2000B Series Kurulum Kılavuzu - Sayfa 11

Masaüstü Digital Electronics Corporation PS-2000B Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Digital Electronics Corporation PS-2000B Series 16 sayfaları. Windows 2000 multi language preinstalled hard disk unit
Ayrıca Digital Electronics Corporation PS-2000B Series için: Kurulum Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Hardware Setup

The HDD unit's installation and system data settings are as follows.

1) Install the HDD unit in the PS-B. Refer to 2 Installation for details. If the

HDD unit is already installed, this step is not necessary.

2) Connect a keyboard to the PS-B.

3) Turn on the PS-B unit's power supply and use the following steps to set up

the system data and recognize the HDD unit.

• Normally, use the factory (initial) settings.

• Your PS-B unit's system data screen menus may differ slightly from

these due to installation of newer software.

• The following explanation uses the PS-B unit's factory settings.

4) When the start-up screen appears, press your PC's [DEL] key.

The Setup utility will start. Select [Standard CMOS Features], then select

[IDE Primary Master]. The following screen will appear.

IDE HDD Auto-Detection

IDE Primary Master

Access Mode

Capacity

Cylinder

Head

Precomp

Landing Zone

Sector

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values

5) Confirm whether "AUTO" is selected for IDE Primary Master. Also, con-

firm whether "AUTO" is selected for the [Access Mode]. If AUTO is not

selected, change these settings to AUTO. If AUTO is selected in both, disk

parameters will be automatically read when the PS-B is turned ON. The

factory setting is AUTO and recommended for most users.

6) After all changes are made, press the ESC key and select [Save & EXIT

Setup] to save the settings. The OS will then start.

Phoenix- AwardBIOS CMOS Setup Utility

IDE Primary Master

[Press Enter]

[Auto]

0 MB

F6:Fail-Safe Defaults

Menu Level

To auto-detect the

HDD's size, head...on

this channel

F7:Optimized Defaults

-11-

Item Help