ActronAir ECOFLEX MINI VRF R-32 Series Kullanıcı El Kitabı - Sayfa 6

Klima ActronAir ECOFLEX MINI VRF R-32 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ActronAir ECOFLEX MINI VRF R-32 Series 20 sayfaları. Four-way compact cassette
Ayrıca ActronAir ECOFLEX MINI VRF R-32 Series için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar)

ActronAir ECOFLEX MINI VRF R-32 Series Kullanıcı El Kitabı
Owner's Manual

01.03. Electric Safety Requirements

WARNING
The air conditioner shall be installed according to the local wiring specifications. Wiring work
must be completed by qualified electricians.
All wiring work must comply with electrical safety specifications.
The air conditioner must be well grounded. Specifically, the main switch of the air conditioner
must have a reliable grounding cable.
Before contacting wiring devices, cut off all the power supplies.
The user MAY NOT disassemble or repair the air conditioner. Doing so can be dangerous. In the event of a fault,
immediately cut off the power and contact your local dealer or technical support.
A separate power supply that meets the rated parameter values must be provided for the air conditioner.
The fixed wiring to which the air conditioner is connected must be equipped with a power cut-off
device that meets the wiring requirements.
To avoid danger, a damaged power cable must be replaced by professionals from the
maintenance department or a similar department of the manufacturer.
The air conditioner's circuit board (PCB) is designed with a fuse to provide overcurrent
protection.
The specifications of the fuse are printed on the circuit board.
NOTE: For the units with R-32 refrigerant , only the blast-proof ceramic fuse can be used.
CAUTION
Always ground the main power switch.
Do not use a damaged power cable and replace it if it is damaged.
When the air conditioner is used for the first time or is in a power-off state for a long time, it needs to be
connected to the power supply and warmed up for at least 12 hours before use.
6
Owner's Manual ECOFLEX MINI VRF R-32 SERIES - 4 WAY COMPACT CASSETTE
Doc. No.9590-4028-05 Ver. 1 230821
ECOFLEX MINI VRF R-32 SERIES