Bitspower Sedna O11DS Kullanım Kılavuzu - Sayfa 3
Bilgisayar Aksesuarları Bitspower Sedna O11DS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bitspower Sedna O11DS 18 sayfaları. For lian li o11 dynamic mini
Ayrıca Bitspower Sedna O11DS için: Kullanım Kılavuzu (18 sayfalar)
Water
Choose your desired dye color and mix it with pure
distilled water. Pour the water mix into the reservoir
via the water filling hole. Once the reservoir is 90%
full, turn on the power supply for the pump to run
and let the air exit the loop. Turn off the power
supply when the reservoir is near empty. Repeat until
all the air has exited the loop.
(In order to power the pump only, connect the power
switch connector to the 24 pin cable of the power
supply. This will allow the power supply to bypass
the motherboard and make the pump work alone.)
Product Warranty Rules
The warranty will be void if any of the situations below happen.
Water Block
- The CPU block and the screws in it has any trace of disassemble.
- The top plate inlet and outlet ports, due to improper use of external forces, are cracked.
Radiator
- The fin of the radiator are broken or deformed due to improper use of external forces.
- The inlet and outlet of the radiator are cracked due to improper use of external forces.
Fitting
- There are signs of damage caused by instrument clamping on the fittings.
PUMP
- Pump damage from pump operation without any liquid.
- Pump damage caused by water leak on the pump's PCB.
- Water tank has been separated from the pump.
Fan
- Fan damaged by water leak.
[ 3 ]
refer toBP-WTP-J04