Bittel 32 SERIES Kullanıcı Kılavuzu - Sayfa 2

Telefon Bittel 32 SERIES için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bittel 32 SERIES 5 sayfaları. Venus series uno media guestroom phone

Sayfayı Yazdır

1. Introduction to the Bittel 32 series

Phone

Bittel's 32 series is available in single line configuration,

with optional speakerphone and up to 10 programmable

guest service keys.

Built to the industry's highest quality control standards

in our own ISO9001 certified factories, Bittel phones

deliver outstanding value and quality, and are

engineered for the demanding hospitality environment.

1.1 Classical Features

◆ SmartTray™, keep the cord in right place tidily and

easy to clean

◆ Support 10/5 Guest Service keys ™

◆Message Waiting Light and Ringer Indicator

◆PrivacyGuard™, Last dialed number disappearing after

a definite time

◆Faceplate Plus™, full length faceplate and placard

faceplate optional

◆Flexible Data Port

◆Indicators for Hold and SPKR

◆Hold, Flash and Redial

◆Ringer Volume HI/LOW adjustable

◆Handset with HAC

◆SPKR and Handset volume three-step adjustable

◆Desk and Wall Mountable

1.2 Specifications

◆Dimensions

Dimensions

Dimensions：220(L)*150(W)*95(H)

◆Handset cord

Handset cord：2.7m (Length)

Handset cord

◆Line cord

Line cord

Line cord：2.0m(Length)

◆Color

Color

Color：Ivory、Black optional

Color

◆Handset

Handset

Handset：Hearing Aid Compatible Handset

◆Dial Character

Dial Character

Dial Character：Standard 12 group（DTMF）

◆Flash time

Flash time：80ms,100ms,300ms,600ms optional ，

Flash time

standard 600ms

◆Message Waiting Light Voltage

Message Waiting Light Voltage：Standard

Message Waiting Light Voltage

90~150V DC Customizedd various MWL card

compatible with PBX

◆Operating Voltage

Operating Voltage

Operating Voltage：24V～60V DC

◆One-Touch Memory Key Programming

One-Touch Memory Key Programming ：

One-Touch Memory Key Programming

Manually Store(√) Hand-held Cloner R.P.(×) Master

Cloner on line(×)

◆Box Dimension

Box Dimension

Box Dimension：467(L)*340(W)*225(H)

◆Package

Package

Package (set/carton)

(set/carton)：10set/Carton

(set/carton)

◆Quality Control

Quality Control

Quality Control：ISO9001, ISO 14001 System

◆Quality Approval, CCC, FCC, CE, RoHS

Quality Approval, CCC, FCC, CE, RoHS

◆FCC rules

FCC rules

FCC rules：The unit complies with part 15 and part

68 of the FCC rules and regulations

2. Installation

2.1 Installation

The Venus Series is designed for hotel applications

and behind a registered PBX system in hotel. The

Venus Series is designed for hotel applications

and behind a registered PBX system in hotel.

The Venus Series is designed for hotel applications

and behind a registered PBX system in hotel.

Determine you have the correct modular jack for

connecting the telephone. If you do not have a

modular jack, one may be obtained at minimal cost at

a local hardware store, discount store or home center.

1) Located on the left side of the Venus phone is a

modular jack. Insert one end of the coiled handset cord

into this jack (you will hear the coil cord click when

properly inserted.)

2) Insert the other end of the coiled handset cord into the

modular jack on the handset.

3) Turn the telephone so the back panel is facing you.

Insert either end of the line cord into the jack on the back

of the telephone labeled "TO TEL".

4) Insert the other end of the line cord into a telephone

wall jack.

5) Once your telephone is connected, place the paper

faceplate over the keys. The plastic overlay slips into

place by hooking the tabs on the overlay into the

recessed slots located on both sides. The overlay is

easiest to insert when the left or right side tabs are

inserted first, and the middle of the overlay is slightly

bowed to allow for insertion of the other tabs.

2.2 Controls, Connections and Function keys

1. Handset Cord Jack --- Modular jack to connect

coiled handset cord from handset to telephone.

2. Handset Wall Mount Clip – Clip to hold handset on

hook in wall mount application

3. Hook Plunger.

4. Data Port – Provides access to the telephone line

for connection of modem, fax, or answering machine

5. Memory Keys – Programmable to add special

features or one touch dial frequently dialed numbers.

6. Dial Keys – Oversized keypad for ease of dialing.

7. Volume key – Key steps through the three

available handset /speaker volume levels [Normal –

Medium – High – Normal]

8. Redial Key – Redials the last number dialed.

9. Flash Key - Enters a 600ms hook switch flash for

accessing special telephone system features.

10. SPKR Key – Activates speakerphone function.

11. [Pause] key -- Hidden key inserts a 3.6 second

pause in stored numbers.

12. MIC. of Speaker .

13. Message Waiting Light – Indicates the phone is

ringing or a message is waiting. Responds to

Neon/90V message waiting signal.

14. Store Key – Hidden key for storing numbers to

Memory.

15. Hold Key – Places a calling on hold.

16. Tel. Jack – Modular jack to connect telephone

line cord.

17. Ring Volume – Adjusts ringer volume to LOW or

HI.

---- Page 2----