Digital Equipment Prioris HX 6000 Kurulum Kılavuzu - Sayfa 5

Sunucu Digital Equipment Prioris HX 6000 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Digital Equipment Prioris HX 6000 16 sayfaları.
Ayrıca Digital Equipment Prioris HX 6000 için: Kurulum Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Install any internal options

If you have options to install, install them now.

1. Unlock doors

2. Unlock side panels

3. Remove side panels

4. Install options

Refer to the following chapters in the System Reference

manual for detailed information.

Server Utilities

Upgrading Your Server's CPU Module

Installing Additional Memory

Installing Optional Disk and Tape Drives

Connecting SCSI and RAID Adapters

Also, refer to the documentation that came with the option

kit for specific installation instructions.

Installation Guide

NOTES

Removing the side panels activates the power interlock

switches. These switches turn off power to your server.

You might injure yourself or damage the server if you

attempt to override or bypass these switches. Always re-

place the side panels before you turn on power to the

server.

Use the brake located at the bottom of your server

lock your server in place.

ISA cards should be installed after you run the System

Configuration Utility in Step 7 or 8 since the SCU will list

IRQs already used.

Before touching any circuit board or component, wear

an anti-static wrist strap, properly grounded to the server

chassis, or touch the metal frame to discharge any static

electricity.

If you plan to use Quick Launch to install your Network

Operating System, your server must meet the following

minimum requirements to proceed with the server installa-

tion:

16 MB of RAM

SVGA monitor

540 MB minimum hard disk drive

Network card

Two or three button mouse

CD-ROM drive attached to the bootable SCSI controller

Keyboard