Bittium OmegaSnap Hızlı Kılavuz - Sayfa 2

Tıbbi Ekipman Bittium OmegaSnap için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Bittium OmegaSnap 6 sayfaları. Ecg electrode

Sayfayı Yazdır

Quick Guide for using Bittium OmegaSnap™ ECG Electrode

Bittium OmegaSnap™

The Bittium OmegaSnap™ ECG Electrode is intended to be

used with the Bittium Faros™ ECG sensor for the purpose of

measuring cardiac signals (ECG).

Equipment

Bittium

Faros™

ECG Sensor

Bittium

OmegaSnap™

Adapter

Caution!

› Place the electrode onto intact, clean

skin only.

› Do not use body lotion or creams in

the electrode area prior to applying the

electrode.

› Do not use outdated electrodes. Please

check the date on the packing material.

› The electrode is for single use only.

Reuse of the product may cause con-

tamination, leading to infections.

› Stop using the Faros sensor and re-

move the OmegaSnap electrode from

the skin if the electrode causes adverse

reactions such as skin irritation or rash.

If any problems occur, please contact

your clinic or person responsible for

treatment.

Bittium

OmegaSnap™

ECG Electrode

› Replace the electrode if it does not

stick to the skin.

› Remove the electrode from the skin

after measuring.

› Use the electrode only with the Bittium

Faros™ device.

› The Faros sensor and OmegaSnap

adapter must be cleaned between

users. The recommended cleaning

method: non-alcoholic cleaning and

disinfection wipes for medical devices,

for example mikrozid® sensitive wipes

or SaniCloth AF3 wipes.

› Follow these instructions. See more

detailed instructions in the Faros

manual.