Digital Equipment PrintServer 17/300 Manuel - Sayfa 6

Yazıcı Digital Equipment PrintServer 17/300 için çevrimiçi göz atın veya pdf Manuel indirin. Digital Equipment PrintServer 17/300 6 sayfaları. Controller firmware version 2.1 upgrade

Sayfayı Yazdır
Installing the Firmware
Verification
Procedure
4
To verify correct installation of the chips, power on the printer.
The power-up diagnostics run and the following display appears
on the operator panel:
XX-XX-XX-XX-XX-XX
2.1
XX
XX
If the operator panel is blank, either the controller board is not
fully seated or the chips are not installed correctly.