AccuVein AV500 Kullanıcı Kılavuzu - Sayfa 7
Tıbbi Ekipman AccuVein AV500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AccuVein AV500 17 sayfaları. A health professional's guide for use and operation
Positioning the AV500
Hold the device from 6–10" (150 to 250 mm) over the surface
of the skin. Scan the area of interest to view. Once a vein is
selected, make sure the vein display light is centered directly
above the vein' s center line. Tilting the device to either side
of the vein will offset the projected vein from its true loca-
tion beneath the skin. You can often enhance display quality
by slightly adjusting the height and angle to the skin. In
particular, moving the device closer or further from the skin
can help bring additional veins into view, depending on the
patient' s vasculature, room lighting, and depth of the veins.
To view vein location most accurately, you
WARNING:
must position the AV500 directly over the center of the vein
being assessed.
Vein projection width is most accurate when
WARNING:
the AV500 is positioned closest to the body.
CAUTION: The AV500 projection may not display veins if
operated under bright light such as bright sunlight
Basic use and operation
Assess the Vasculature
While the vein display light is on, shine the AV500 over the
patient's skin. You can do this before palpation, scanning
quickly over the skin to help narrow down possible locations,
or after palpation has confirmed vein location and suitability.
You can then often see veins better by rotating the AV500
slightly on its axis and moving the device closer to or further
away from the skin.
Confirm the Vein
After assessing the patient' s vasculature, confirm the site for
your procedure by verifying the location and suitability of the
vein using normal medical techniques and good medical
judgment, such as vein visualization, palpation, and other
medical techniques.
An AccuVein hands-free accessory allows you to keep your
hands free to perform medical procedures. You can also hand
the AV500 to an assistant during the procedure. The AV500
should be used only by qualified medical professionals and
only in conjunction with appropriate visual and tactile vein
assessment techniques.
7