Siemens SIMATIC ET 200AL Manuel - Sayfa 38

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200AL için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC ET 200AL 50 sayfaları. 10-link digital output module dq 8x24vdc/2a 8xm12
Ayrıca Siemens SIMATIC ET 200AL için: Manuel (38 sayfalar), Manuel (38 sayfalar), Manuel (32 sayfalar), Manuel (37 sayfalar), Ekipman Kılavuzu (46 sayfalar), Manuel (26 sayfalar), Ekipman Kılavuzu (28 sayfalar), Ekipman Kılavuzu (27 sayfalar), Manuel (25 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC ET 200AL Manuel

Technical specifications

Technical specifications of the analog input module AI 4xU/I/RTD 4xM12
The following table shows the technical specifications as of 07/2018. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7144-5KD00-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
I&M data
•
Engineering with
STEP 7 TIA Portal configurable/integrated
•
as of version
STEP 7 configurable/integrated as of ver-
•
sion
PROFIBUS as of GSD version/GSD revi-
•
sion
PROFINET as of GSD version/GSD revi-
•
sion
Supply voltage
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Load voltage 1L+
Rated value (DC)
•
permissible range, lower limit (DC)
•
permissible range, upper limit (DC)
•
Reverse polarity protection
•
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)
Manual, 08/2018, A5E32350124-AD
6ES7144-5KD00-0BA0
AI 4xU/I/RTD, 4xM12
E02
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V13 SP1 or higher
From V5.5 SP4 Hotfix 3
GSD as of Revision 5
GSDML V2.3.1
20.4 V
28.8 V
24 V
20.4 V
28.8 V
Yes; against destruction
35 mA; without load
4 A; Maximum value
4 A; Maximum value
6
37