Siemens SIMATIC ET 200AL Manuel - Sayfa 29

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200AL için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC ET 200AL 32 sayfaları. 10-link digital output module dq 8x24vdc/2a 8xm12
Ayrıca Siemens SIMATIC ET 200AL için: Manuel (38 sayfalar), Manuel (50 sayfalar), Manuel (38 sayfalar), Manuel (37 sayfalar), Ekipman Kılavuzu (46 sayfalar), Manuel (26 sayfalar), Ekipman Kılavuzu (28 sayfalar), Ekipman Kılavuzu (27 sayfalar), Manuel (25 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC ET 200AL Manuel
Configuring
Rules
Observe the following rules when configuring:
• With mixed configurations, the following maximum configuration is possible:
– 31 slots for ET 200SP modules (IM 155-6 DP HF and IM 155-6 PN ST)
– 63 slots for ET 200SP modules (IM 155-6 PN HF and CPUs)
– 16 slots for ET 200AL I/O modules
– 1 slot for BU-Send/BA-Send 1xFC
– 1 slot for server module.
• The mixed configuration may contain a maximum of 31 (IM 155-6 DP HF and
IM 155-6 PN ST)/63 (IM 155-6 PN HF and CPUs) ET 200SP I/O modules.
• The server module can also be mounted right next to the BU-Send/BA-Send 1xFC.
• Supported functions:
1)
Configuring
Observe the following points when configuring:
• BU-Send/BA-Send 1xFC and server module must be configured. There are no parameters
for BU-Send/BA-Send 1xFC.
• Arrangement of the modules in the configuration:
– Configure the BU-Send/BA-Send 1xFC modules downstream from the interface module
– Configure the ET 200AL I/O modules from slot 66 (PROFINET)/67 (CPU)/34 (PROFIBUS).
• The layout of the modules represents a preset configuration and is independent of the
configuration control.
• The system redundancy S2 function is not available in a mixed configuration.
28
Function
Isochronous mode
Configuration control
Shared device
PROFIenergy
System redundancy S2
With IM 155-6 PN/3 HF and IM 155-6 PN/2 HF V4.2 or higher
in slot 1. Position the ET 200SP modules behind it.
Mixed configuration
ET 200SP
IM
CPU
●
--
●
●
●
●
●
--
●
--
1
Equipment Manual, 11/2020, A5E33344611-AD
ET 200AL I/O modules on
ET-Connection
--
●
●
●
●
1
Mixed configuration