Siemens simatic ET 200MP Manuel - Sayfa 28

Endüstriyel Ekipmanlar Siemens simatic ET 200MP için çevrimiçi göz atın veya pdf Manuel indirin. Siemens simatic ET 200MP 47 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens simatic ET 200MP için: Manuel (40 sayfalar), Manuel (24 sayfalar), Manuel (29 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Manuel (30 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (39 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (35 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (29 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Siemens simatic ET 200MP Manuel
Interrupts and diagnostic, error, and system alarms
5.1 Status and error displays
Meaning of the LEDs P1 LINK/TX/RX, P2 LINK/TX/RX
Table 5- 2
Meaning of the LEDs P1 LINK/TX/RX, P2 LINK/TX/RX
LEDs
P1 LINK/TX/RX,
P2 LINK/TX/RX
There is no Ethernet connection between the
PROFINET interface of your PROFINET device
Off
and a communication partner (e.g. IO controller).
There is an Ethernet connection between the
PROFINET interface of your PROFINET device
On
and a communication partner (e.g., IO controller).
There is active data traffic (sending/receiving) via
the Ethernet connection.
flickers
"Node flash test" is performed. (The LEDs
RUN/ERROR/MAINT are also flashing.)
Flashes
28
Meaning
Remedy
Check whether the bus cable to the switch/IO
controller is interrupted.
---
---
---
Interface module IM 155-5 PN ST (6ES7155-5AA01-0AB0)
Manual, 11/2017, A5E03612323-AC