Siemens simatic ET 200MP Kullanıcı Kılavuzu - Sayfa 21

Endüstriyel Ekipmanlar Siemens simatic ET 200MP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Siemens simatic ET 200MP 44 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens simatic ET 200MP için: Manuel (40 sayfalar), Manuel (24 sayfalar), Manuel (29 sayfalar), Manuel (47 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Manuel (30 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (39 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (35 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (29 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Sayfayı Yazdır

Siemens simatic ET 200MP Kullanıcı Kılavuzu

1. Wiring

Parameters/address space

4.3 Address space

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image of the

outputs/inputs.

Configuration options of DQ 16x24VDC/0.5A HF

You can configure the module with STEP 7 (TIA Portal) or with a GSD file.

When you configure the module by means of the GSD file, the configurations are available

under different abbreviations/module names.

The following configurations are possible:

Table 4- 2

Configuration options

Configuration

1 x 16-channel without value status

1 x 16-channel with value status

2 x 8-channel without value status

2 x 8-channel with value status

1 x 16-channel with value status for

module-internal Shared Output with up to

4 submodules

Note

Substitute value behavior in shared device operation with the following configuration (V1.0

only):

• 2 x 8-channel with / without value status

If the system is in shared device mode and one of the IO controllers involved goes into

STOP or fails due to a communication failure, for example, all submodules of the output

module perform the configured substitute value reaction (e.g. shutdown).

This means that even when only one IO controller fails, the other IO controllers associated

with the shared device no longer control the assigned submodule of the output module.

Short designation/module

name in the GSD file

DQ 16x24VDC/0.5A HF

DQ 16x24VDC/0.5A HF QI

DQ 16x24VDC/0.5A HF S

DQ 16x24VDC/0.5A HF S QI

DQ 16x24VDC/0.5A HF

MSO

Digital output module DQ 16x24VDC/0.5A HF (6ES7522-1BH01-0AB0)

Configuration software, e.g., STEP 7 (TIA Por-

tal)

Integrated in the

hardware catalog

STEP 7 (TIA Portal) V12

STEP 7 (TIA Portal)

as of V13 SP1 with

HSP 0143

(PROFINET IO only)

Manual, 06/2018, A5E35683409-AC

GSD file in

or higher or STEP 7

V5.5 SP3 or higher