Siemens SIMATIC ET 200SP Manuel - Sayfa 19

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC ET 200SP 34 sayfaları. Distributed i/o system
Ayrıca Siemens SIMATIC ET 200SP için: Manuel (40 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Manuel (34 sayfalar), Manuel (48 sayfalar), Manuel (30 sayfalar), Manuel (34 sayfalar), Ürün Bilgileri (38 sayfalar), Manuel (37 sayfalar), Manuel (36 sayfalar), Manuel (44 sayfalar), Manuel (31 sayfalar), Manuel (35 sayfalar), Manuel (23 sayfalar), Yapılandırma Kılavuzu (20 sayfalar), Manuel (29 sayfalar), Manuel (33 sayfalar), Manuel (31 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Manuel (31 sayfalar), Manuel (28 sayfalar), Manuel (41 sayfalar), Manuel (32 sayfalar), Manuel (49 sayfalar), Manuel (24 sayfalar), Manuel (34 sayfalar), Manuel (41 sayfalar), Manuel (30 sayfalar), Manuel (31 sayfalar), Manuel (27 sayfalar), Manuel (24 sayfalar), Manuel (24 sayfalar), Manuel (25 sayfalar), Manuel (49 sayfalar), Manuel (40 sayfalar), Manuel (38 sayfalar), Manuel (39 sayfalar), Ürün Bilgileri (24 sayfalar), Manuel (32 sayfalar), Ürün Bilgileri (10 sayfalar), Ekipman Kılavuzu (43 sayfalar), Manuel (33 sayfalar), Ekipman Kılavuzu (44 sayfalar), Orijinal Kullanım Talimatları (6 sayfalar), Manuel (35 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (50 sayfalar), Manuel (30 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (34 sayfalar), Manuel (44 sayfalar), Manuel (33 sayfalar), Ekipman Kılavuzu (42 sayfalar), Orijinal Talimat Kılavuzu (16 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC ET 200SP Manuel
Address space for configuration as 1 x 4-channel DQ 4×24VDC/2A HF V1.0, QI
The following figure shows the assignment of the address space for the configuration as a
4-channel module with value status. You can freely assign the start address for the module.
The addresses of the channels are derived from the start address.
Image 4-2
Address space for configuration as 1 x 4-channel DQ 4×24VDC/2A HF V1.0, MSO
For the configuration as a 1 x 4-channel module (module-internal shared output, MSO),
channels 0 to 3 of the module are copied to up to four submodules. Channels 0 to 3 are then
available with identical values in various submodules. These submodules can be assigned to
up to four IO controllers when the module is used in a shared device:
● The IO controller to which submodule 1 is assigned has write access to outputs 0 to 3.
● The IO controller to which submodule 2, 3, or 4 is assigned has read access to outputs 0
to 3.
Value status (Quality Information,QI)
The meaning of the value status depends on the submodule on which it occurs.
For the 1st submodule (= basic submodule), the value status 0 indicates that the value is
incorrect or that the IO controller of the basic submodule is in STOP state.
For the 2nd to 4th submodule (= MSO submodule), the value status 0 indicates that the
value is incorrect or one of the following errors has occurred:
● The basic submodule is not yet configured (not ready).
● The connection between the IO controller and the basic submodule has been interrupted.
● The IO controller of the basic submodule is in STOP or POWER OFF state.
Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)
Manual, 12/2015, A5E32855695-AC
Address space for configuration as 1 x 4-channel DQ 4×24VDC/2A HF, QI with value
status
Parameters/address space
4.3 Address space
19