Siemens SIMATIC ET 200SP Ekipman Kılavuzu - Sayfa 14

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens SIMATIC ET 200SP 42 sayfaları. Distributed i/o system
Ayrıca Siemens SIMATIC ET 200SP için: Manuel (40 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Manuel (34 sayfalar), Manuel (48 sayfalar), Manuel (30 sayfalar), Manuel (34 sayfalar), Ürün Bilgileri (38 sayfalar), Manuel (37 sayfalar), Manuel (36 sayfalar), Manuel (44 sayfalar), Manuel (31 sayfalar), Manuel (35 sayfalar), Manuel (23 sayfalar), Yapılandırma Kılavuzu (20 sayfalar), Manuel (34 sayfalar), Manuel (29 sayfalar), Manuel (33 sayfalar), Manuel (31 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Manuel (31 sayfalar), Manuel (28 sayfalar), Manuel (41 sayfalar), Manuel (32 sayfalar), Manuel (49 sayfalar), Manuel (24 sayfalar), Manuel (34 sayfalar), Manuel (41 sayfalar), Manuel (30 sayfalar), Manuel (31 sayfalar), Manuel (27 sayfalar), Manuel (24 sayfalar), Manuel (24 sayfalar), Manuel (25 sayfalar), Manuel (49 sayfalar), Manuel (40 sayfalar), Manuel (38 sayfalar), Manuel (39 sayfalar), Ürün Bilgileri (24 sayfalar), Manuel (32 sayfalar), Ürün Bilgileri (10 sayfalar), Ekipman Kılavuzu (43 sayfalar), Manuel (33 sayfalar), Ekipman Kılavuzu (44 sayfalar), Orijinal Kullanım Talimatları (6 sayfalar), Manuel (35 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (50 sayfalar), Manuel (30 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (34 sayfalar), Manuel (44 sayfalar), Manuel (33 sayfalar), Orijinal Talimat Kılavuzu (16 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC ET 200SP Ekipman Kılavuzu
Product overview
3.2 Hardware properties
PROFINET interface
(X1)
Operation of the CPU
as
•
IO controller
•
I-device
PROFIBUS DP
DP master
Intelligent DP slave (I-
slave)
Accessories
NOTE
The CPU is delivered without a BusAdapter. You can find the article numbers of the supported
BusAdapters in the "Accessories/spare parts" section of the ET 200SP distributed I/O system
(https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
14
Property
The interface has an integrated 3-port switch.
Port 1 and port 2 are located on the optionally
pluggable BusAdapter. Port 3 is integrated in
the housing of the CPU. You can connect the
PROFINET IO to the CPU via the BusAdapter.
You will find information on the BusAdapters
supported by the CPU in the section Connect­
ing (Page 21).
In addition to PROFINET basic functionality, the
interface also supports PROFINET IO RT (real-
time) and IRT (isochronous real-time).
PROFINET IO communication or real-time set­
tings can be configured. The basic functionality
of PROFINET supports HMI communication,
communication with the configuration system,
communication with a higher-level network
(backbone, router, Internet) and communica­
tion with another machine or automation cell.
Port 1 and port 2 can also be used as ring ports
for the configuration of redundant ring struc­
tures in Ethernet.
•
IO controller:
As an IO controller, the CPU addresses the
connected IO devices
•
I‑device:
As an I-device (intelligent IO device), the
CPU is assigned to a higher-level IO control­
ler and is used in the process as an intelli­
gent pre-processing unit of sub-processes
To use the ET 200SP CPU as a DP master, you
need the CPU and the optional communication
module CM DP (PROFIBUS interface X2). When
used as a DP master, the ET 200SP CPU
exchanges data with the connected DP slaves
via PROFIBUS DP.
To use the ET 200SP CPU as an intelligent DP
slave (I-slave), you need the CPU and the
optional communication module CM D
(PROFIBUS interface X2). As an I-slave, the ET
200SP CPU is connected via PROFIBUS DP to a
higher-level DP master and exchanges data
with it.
Description
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
Additional information
•
PROFINET Function Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/49948­
856)
•
ET 200SP System Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/58649­
293)
•
PROFIBUS Function Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/59193­
579)
•
Communication module CM
DP Equipment Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/90156­
526)