Siemens SIMATIC ET 200SP HA Manuel - Sayfa 28

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP HA için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC ET 200SP HA 50 sayfaları. Distributed i/o devices busadapter for distributed i/o
Ayrıca Siemens SIMATIC ET 200SP HA için: Manuel (32 sayfalar), Manuel (34 sayfalar), Manuel (38 sayfalar), Ekipman Kılavuzu (44 sayfalar), Ekipman Kılavuzu (50 sayfalar), Ekipman Kılavuzu (38 sayfalar), Ekipman Kılavuzu (46 sayfalar), Ekipman Kılavuzu (42 sayfalar), Ekipman Kılavuzu (44 sayfalar), Ekipman Kılavuzu (36 sayfalar), Ekipman Kılavuzu (38 sayfalar)

Displays and interrupts

5.2 Interrupts

5.2

Interrupts

The I/O module supports diagnostics interrupts and hardware interrupts. You can find

additional information on hardware interrupts in the appendix Hardware interrupts (Page 46)

Diagnostics interrupts

The module generates a diagnostics interrupt at the following events:

● Channel/component temporarily unavailable

● Hardware interrupt lost

● Module is faulty

● Short-circuit

● Wire break

● Supply voltage missing

● Change-over contact error

● Flutter error

● Parameter assignment error

● Retentive memory in carrier module defective

● Retentive memory in the terminal block defective

● Redundancy partner has different hardware/firmware

● IO redundancy warning

● Redundancy parameter assignment inconsistent

Note

A pending "Module is defective" or "Over temperature" diagnostic is not deleted from the

module without a restart.

Digital Input Module DI 16xNAMUR HA (6DL1131-6TH00-0PH1)

Manual, 11/2017, A5E39293880-AB