Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA Ekipman Kılavuzu - Sayfa 19
Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA 36 sayfaları. Digital output module
Ayrıca Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA için: Manuel (38 sayfalar)
Sayfayı Yazdır
Parameters
6.1
Parameter types
Definition
You define and thereby influence the functions supported by the module operation of the I/O
module via the parameter types.
6.2
Module/channel parameters
Definition
Module/channel parameters are specific parameters whose configuration can affect the entire
module or channels.
Note
Each re-parameterization resets the corresponding reaction.
Description
The following module/channel parameters are available:
Parameters
Diagnostics, Missing supply
voltage L+ (Page 20)
Diagnostics, Short-circuit to
ground (Page 20)
Channel activated
(Page 21)
Reaction to CPU STOP
(Page 21)
Substitute value (Page 21)
DQ 32x24VDC/0.5A HA
Equipment Manual, 08/2019, A5E48262762-AB
Value range
•
Enabled
•
Disabled
•
Enabled
•
Disabled
•
Enabled
•
Disabled
•
Shutdown
•
Keep last value
•
Output substitute value
1
•
0
•
1
Default
Parameter re‐
assignment in
Enabled
Yes
Enabled
Yes
Enabled
Yes
Shutdown
Yes
0
Yes
6
Efficiency range
RUN
Module
Channel
Channel
Channel
Channel
19