Epson XP-422 Buradan başlayın - Sayfa 2
Yazıcı Epson XP-422 için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson XP-422 4 sayfaları.
Ayrıca Epson XP-422 için: Ağ Kılavuzu (35 sayfalar)
Sayfayı Yazdır
Basic Operations / 基本操作
Guide to Control Panel
控制面板說明
Turns the printer on or off.
開啟或關閉印表機電源。
Displays the home screen.
顯示主畫面。
Press l, u, r, d to select menus. Press the OK button to enter
the selected menu.
按下 l、u、r、d 可選擇選單。按下 OK 鍵可進入選取的
選單。
Cancels/returns to the previous menu.
取消/返回上一個選單。
,
Sets the number of copies and prints.
設定份數並進行列印。
Starts the operation you selected.
啟動您選取的操作。
Stops the ongoing operation or initialize the current settings.
停止目前操作或初始化目前設定。
Icons showing the network status are displayed at the top-right
of the LCD screen.
顯示網路狀態的圖示會出現在液晶螢幕的右上角。
Loading Paper
裝入紙張
Q
Do not load paper above H mark inside the edge guide.
放入的紙張厚度請勿超出邊緣定位器內側的 H 記號。
A�
Flip the feeder guard, and then slide out the paper support and the output tray.
翻開進紙槽護蓋，然後滑出紙張支撐板及出紙托盤。
B�
Load paper with the printable side face-up against the right side of the sheet
feeder.
將紙張的列印面朝上，靠齊自動進紙槽的右側放入。
C�
Slide the edge guide against the paper, and flip the guard back.
靠著紙張滑動邊緣定位器，然後翻回護蓋。
The paper setup screen is displayed on the LCD screen. Select the paper
D�
size and paper type you loaded in the printer.
紙張設定畫面會顯示在液晶螢幕上。選擇放入印表機的紙張大小及紙
張種類。
Q
Make sure you place the paper against the right side of the sheet
feeder. Otherwise, the printer cannot detect the paper and the
paper setup screen is not displayed.
請確定紙張靠齊自動進紙槽的右側。否則印表機無法偵測紙張
且不會顯示紙張設定畫面。
Copying
複印
A�
Open the document cover and place your original face-down on the scanner
glass. Align the original with the front right corner of the glass.
打開文件上蓋，將原稿面朝下放在工作平台上。將原稿對齊工作平台的右前
方。
B�
Close the document cover.
闔上文件上蓋。
C�
Enter Copy mode from the home screen.
從主畫面進入複印模式。
D�
Set the number of copies, and then select Color or B&W.
設定份數，然後選擇彩色或黑白。
Press OK to display the copy setting menus.
E�
按下 OK 鍵顯示複印設定選單。
Use u or d to select a setting item such as paper size, and then use l or r
F�
to change the setting.
使用 u 或 d 選擇紙張大小等設定項目，然後使用 l 或 r 變更設
定。
Press x to start copying.
G�
按下 x 鍵開始複印。
More Functions
更多功能
The printer has special menus that allow you to print original stationery.
Select More Functions from the home screen, and then select Personal
Stationery.
印表機包含可以列印獨創信紙的特殊選單。
從主畫面選擇更多功能，然後選擇個人化信紙。