Siemens SIMATIC NET Kurulum Kılavuzu - Sayfa 15

Endüstriyel Ekipmanlar Siemens SIMATIC NET için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Siemens SIMATIC NET 40 sayfaları. Network components bus terminal
Ayrıca Siemens SIMATIC NET için: Kullanım Talimatları Kılavuzu (29 sayfalar), Kullanım Talimatları Kılavuzu (50 sayfalar), Kullanım Talimatları Kılavuzu (28 sayfalar), Montaj Talimatları Kılavuzu (6 sayfalar), Ürün Bilgileri (6 sayfalar), Kurulum Kılavuzu (40 sayfalar), Kurulum Kılavuzu (50 sayfalar), Referans Kılavuzu (14 sayfalar), Kurulum Kılavuzu (34 sayfalar), Kurulum Kılavuzu (48 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Installing the Device

2.1 General Procedure

of a tool, lock and key, or other means of security, and controlled by the authority

responsible for the location.

2.1

General Procedure

The general procedure for installing the device is as follows:

Note

The user is responsible for the operating environment of the device, including

maintaining the integrity of all protective conductor connections and checking

equipment ratings. Make sure to review all operating and installation instructions

before commissioning or performing maintenance on the device.

2.2

When unpacking the device, do the following:

Note

If any item is missing or damaged, contact Siemens for assistance.

2.3

The RUGGEDCOM RMC30 is designed for maximum mounting and display flexibility.

It can be equipped with adapters that allow it to be attached to a DIN rail or panel.

Heat generated by the device is channeled outwards from the enclosure. As such, it

is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the

device to allow for some convectional airflow.

Review the relevant certification information for any regulatory requirements.

For more information, refer to

Mount the device.

Set the operating mode.

Connect power to the device and ground the device to safety Earth.

Connect the device to the network.

Configure the device.

Inspect the package for damage before opening it.

Visually inspect each item in the package for any physical damage.

Verify all items are included.

NOTICE

"Approvals (Page

25)".

Installation Manual, 04/2021, C79000-G8976-1008-10

RUGGEDCOM RMC30