Siemens SIMATIC NET Kullanım Talimatları Kılavuzu - Sayfa 28

Endüstriyel Ekipmanlar Siemens SIMATIC NET için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIMATIC NET 32 sayfaları. Network components bus terminal
Ayrıca Siemens SIMATIC NET için: Kullanım Talimatları Kılavuzu (29 sayfalar), Kullanım Talimatları Kılavuzu (50 sayfalar), Kullanım Talimatları Kılavuzu (28 sayfalar), Montaj Talimatları Kılavuzu (6 sayfalar), Ürün Bilgileri (6 sayfalar), Kurulum Kılavuzu (40 sayfalar), Kurulum Kılavuzu (50 sayfalar), Kurulum Kılavuzu (40 sayfalar), Referans Kılavuzu (14 sayfalar), Kurulum Kılavuzu (34 sayfalar), Kurulum Kılavuzu (48 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC NET Kullanım Talimatları Kılavuzu
Approvals

5.1 Note for Australia

EMC (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the electromagnetic
compatibility requirements according to the EU Directive 2014/30/EU as well as the UK-
Regulation SI 2016/1091 and their associated amendments.
Applied standards:
• EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments
• EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
You will find the current versions of the standards in the currently valid EC/UK Declaration of
Conformity.
RoHS
The SIMATIC NET products described in these operating instructions meet the requirements on
the restriction of the use of certain hazardous substances in electrical and electronic equipment
according to the EU Directive 2011/65/EU as well as the UK-Regulation SI 2012/3032 and their
associated amendments.
Applied standard:
• EN IEC 63000
FM
The product meets the requirements of the standards:
• Factory Mutual Approval Standard Class Number 3611
• FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T3...T6 und
Non Incendive / Class I / Zone 2 / Group IIC / T3...T6
You will find the temperature class on the type plate on the module.
5.1
Note for Australia
C-TICK
The product meets the requirements of the AS/NZS 2064 standard (Class A).
cULus approval for industrial control equipment
cULus Listed IND. CONT. EQ.
Underwriters Laboratories Inc. complying with
• UL 508
• CSA C22.2 No. 142-M1987
28
Operating Instructions, 06/2022, C79000-G8976-C333-02
12M bus terminal