Siemens SIMATIC PCS 7 Manuel - Sayfa 32

Endüstriyel Ekipmanlar Siemens SIMATIC PCS 7 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC PCS 7 39 sayfaları. Process control system, basis library readme v9.0 sp1 online
Ayrıca Siemens SIMATIC PCS 7 için: Giriş Kılavuzu (6 sayfalar), Sistem Kılavuzu (28 sayfalar), İşlev Kılavuzu (42 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Beni Oku (26 sayfalar)

Sayfayı Yazdır

4 Parameterization

11. Once telegram 20 has been successfully reset, press the ESC button

repeatedly to navigate back to the Status screen.

Note

With the IOP-2 in default settings, the parameter change will have already been

copied to ROM.

However, if there is still a BUS error pending on the G120X, it is recommended

to restart the drive by disconnecting and reconnecting the power supply.

12. Issue an initial switch-on command and a speed specification via the OS

faceplate to the motor to start motor identification.

Figure 4-20

13. After the identification, you can restart the drive by deselecting the ON

command and starting with a new switch-on signal.

The motor will rotate with the speed setpoint value. You can control the motor

in manual mode (via IOP keys) or in automatic mode (via the PCS 7 program).

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021