Siemens SIMATIC RTLS4084T Kullanım Talimatları Kılavuzu - Sayfa 27
Endüstriyel Ekipmanlar Siemens SIMATIC RTLS4084T için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIMATIC RTLS4084T 35 sayfaları. Localization systems
Ayrıca Siemens SIMATIC RTLS4084T için: Kullanım Talimatları Kılavuzu (23 sayfalar)
Sayfayı Yazdır
4.2
Replacing the battery pack
To replace the battery pack, follow these steps:
1. Loosen the screw of the battery box cover on the rear of the device with a Phillips
screwdriver.
2. Remove and disconnect the empty battery pack.
3. Plug in the new battery pack and place it into the enclosure.
4. Then close the housing again, making sure that the sealing ring on the screw is positioned
correctly. Recommended tightening torque for the screw is 0.4 Nm.
5. Make sure that the connecting cable is positioned correctly so that it is not crushed when
you close the battery box cover.
Note
The batteries of the device should only be changed in dry environments.
Note the following when replacing batteries
• Do not insert a damaged battery pack.
• Batteries inserted with reverse polarity cannot be reused.
4.3
Cleaning and maintenance
The enclosure may only be opened to change batteries.
The device may only be repaired or opened for other types of work by an authorized
maintenance company.
Improper opening or repairing of the device may result in risks for the user. Opening the
device without permission renders the warranty of the Siemens AG null and void.
Do not clean the enclosure with liquids or abrasive, caustic or flammable cleaning products.
SIMATIC RTLS4084T
Operating Instructions, 04/2021, C79000-G8976-C626-02
CAUTION
Installation & operation
4.2 Replacing the battery pack
27