Siemens Simatic S7-1500 Manuel - Sayfa 13

Endüstriyel Ekipmanlar Siemens Simatic S7-1500 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens Simatic S7-1500 39 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens Simatic S7-1500 için: Manuel (40 sayfalar), Manuel (37 sayfalar), Manuel (47 sayfalar), Manuel (24 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (45 sayfalar), Manuel (27 sayfalar), Yapılandırma Kılavuzu (20 sayfalar), Manuel (47 sayfalar), Manuel (43 sayfalar), Manuel (48 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Manuel (50 sayfalar), Manuel (30 sayfalar), Manuel (41 sayfalar), Manuel (50 sayfalar), Manuel (40 sayfalar), Güvenlik Programlama Manualline (48 sayfalar), İletişim Talimat Kılavuzu (36 sayfalar), Manuel (40 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Uygulama Açıklaması (50 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (41 sayfalar), Manuel (46 sayfalar), Manuel (38 sayfalar), Manuel (35 sayfalar), Manuel (28 sayfalar), Manuel (35 sayfalar), Ekipman Kılavuzu (35 sayfalar), Manuel (50 sayfalar), Ekipman Kılavuzu (32 sayfalar), Ekipman Kılavuzu (38 sayfalar), Manuel (29 sayfalar), Ekipman Kılavuzu (38 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Sayfayı Yazdır

• Configurable diagnostics can be set for each channel

• Automatic backup of the device parameters during replacement of the IO-Link device

(only for V1.1 devices)

• Configuration limits:

– Max. 32 bytes input and output data per port

– Max. 240 bytes input and output data per module

The module supports the following functions:

• Firmware update

• Identification and maintenance data (I&M)

• IO-Link port configuration with S7-PCT

• IO-Link port configuration with STEP7 or GSD (without S7-PCT)

• Variable address range of I/O data with up to 240 byte inputs and 240 byte outputs

• Master backup with function block "LIOLink_Master"

• Port Qualifier Information (PQI)

• I&M 0 to 3

The module can be used with the following engineering tools:

Table 2-1 Engineering tools

Firmware version of the

module

V1.0 (in

CPU/PROFINET/PROFIBUS sta

tion)

Accessories/spare parts

The following accessories/spare parts are available for the module and can also be ordered

separately:

• Labeling strips

• U connector

• Universal front cover

The following component must be ordered separately:

• Front connectors, including potential jumpers and cable ties

Additional information

You can find more information on accessories in the S7-1500/ET 200MP Distributed I/O Sys

tem (https://support.industry.siemens.com/cs/ww/en/view/59191792) system manual in the

Accessories/Spare parts section.

2.2

Functions

IO-Link is a point-to-point connection between a master and a device. Both conventional and

intelligent sensors/actuators can be used as devices at the IO-Link via unshielded standard

Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)

Equipment Manual, 08/2022, A5E45488510-AB

S7-PCT

STEP 7 (TIA Portal)

As of V3.5 SP1

Product overview

As of V15.1

2.2 Functions

GSD file