Siemens Simatic S7-1500/ET 200MP Ekipman Kılavuzu - Sayfa 23
Endüstriyel Ekipmanlar Siemens Simatic S7-1500/ET 200MP için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens Simatic S7-1500/ET 200MP 34 sayfaları. Digital input module di 16x24vdc ba
Ayrıca Siemens Simatic S7-1500/ET 200MP için: Manuel (28 sayfalar), Manuel (41 sayfalar), Manuel (35 sayfalar)
Sayfayı Yazdır
Address space
Address space for configuration as 8 x 8-channel DI 64x24VDC SNK/SRC BA S
For the configuration as an 8 x 8-channel module, the channels of the module are divided
into multiple submodules. The submodules can be assigned to different IO controllers when
the module is used in a shared device.
The number of usable IO controllers depends on the interface module used. Please observe
the information in the manual for the particular interface module.
Unlike the 1 x 64-channel module configuration, each of the eight submodules has a freely
assignable start address.
Figure 4-2
Address space for configuration as 1 x 64-channel DI 64x24VDC SNK/SRC BA MSI
The channels 0 to 63 of the module are copied in up to 4 submodules for the configuration as
1 x 64-channel module (module-internal shared input, MSI). Channels 0 to 63 are then
available with identical input values in various submodules. These submodules can be
assigned to up to four IO controllers when the module is used in a shared device. Each IO
controller has read access to the same channels.
The number of usable IO controllers depends on the interface module used. Please observe
the information in the manual for the particular interface module.
Value status (Quality Information, QI)
The meaning of the value status depends on the submodule involved.
For the 1st submodule (=basic submodule), the value status is not relevant.
For the 2nd to 4th submodule (=MSI submodule), the value status 0 indicates that the value
is incorrect or the basic submodule has not yet been configured (not ready).
22
Address space for configuration as 8 x 8-channel DI 64x24VDC SNK/SRC BA S
Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48025116-AA