Siemens Simatic S7-1500/ET 200MP Manuel - Sayfa 18
Endüstriyel Ekipmanlar Siemens Simatic S7-1500/ET 200MP için çevrimiçi göz atın veya pdf Manuel indirin. Siemens Simatic S7-1500/ET 200MP 35 sayfaları. Digital input module di 16x24vdc ba
Ayrıca Siemens Simatic S7-1500/ET 200MP için: Ekipman Kılavuzu (34 sayfalar), Manuel (28 sayfalar), Manuel (41 sayfalar)
Sayfayı Yazdır
Diagnostics alarms
5.1 Status and error displays
Meaning of the LED displays
The tables below explain the meaning of the status and error displays.
LED RUN/ERROR
Table 5- 1
RUN/ERROR status and error displays
LED
RUN
ERROR
Off
Off
Flashes
Off
On
Off
Flashes
Flashes
LED CHx
Table 5- 2
CHx status display
LED CHx
Off
On
18
Meaning
Voltage missing or too low at backplane bus.
Module is starting up.
Module is ready.
Hardware defective.
Meaning
0 = Status of the input signal.
1 = Status of the input signal.
Switch on the CPU and/or the system pow-
•
er supply modules.
Verify that the U connectors are inserted.
•
Check to see if too many modules are in-
•
serted.
---
Replace the module.
---
---
Digital input module DI 16x24VDC BA (6ES7521-1BH10-0AA0)
Manual, 09/2014, A5E32363114-AB
Remedy
Remedy