Siemens SIMATIC S7-1500R/H Ekipman Kılavuzu - Sayfa 11
Endüstriyel Ekipmanlar Siemens SIMATIC S7-1500R/H için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens SIMATIC S7-1500R/H 44 sayfaları. Cpu 1515r-2 pn (6es7515-2rm00-0ab0)
Ayrıca Siemens SIMATIC S7-1500R/H için: Manuel (42 sayfalar), Manuel (46 sayfalar), Ekipman Kılavuzu (44 sayfalar), Manuel (45 sayfalar)
Sayfayı Yazdır
New functions
Synchronization module up to 40 km
Data block functions
Network management protocol SNMP: A
simple configuration option is now avail
able for using SNMP services. For new
configurations, this is disabled by default
in accordance with "Security-by-Default".
Trace: The S7-1500 CPU supports up to
64 configured signals per trace.
Additional information
You can find an overview of all new functions, improvements and revisions in the respective
firmware version on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109478459).
3.2
Configuration and operating principle
Structure
The S7-1500H redundant system consists of the following components:
• Two CPUs of the type CPU 1518HF‑4 PN
• Two SIMATIC memory cards
• Four synchronization modules (two synchronization modules in each H-CPU)
• Two redundancy connections (two duplex fiber-optic cables)
• IO devices
• Load power supply (optional)
You mount the CPUs on a common mounting rail or spatially separated on two separate
mounting rails. You connect the two CPUs with fiber-optic cables to two synchronization
modules in each CPU.
CPU 1518HF-4 PN (6ES7518-4JP00-0AB0)
Equipment Manual, 11/2022, A5E49868646-AB
Customer benefits
As of FW version V3.0, a new synchronization
module Sync Module 1 GB FO 40 km is available.
The synchronization module enables a distance
of up to 40 km between the two H-CPUs via
optical fibers. This allows you to use the
S7-1500H redundant system for long tunnel
installations.
As of FW version V3.0, the instructions for the
data block functions are supported:
•
CREATE_DB (create data block)
•
READ_DBL (read from data block in the load
memory)
•
WRIT_DBL (write to data block in load
memory)
•
DELETE_DB (delete data block)
Can be enabled/disabled in the CPU properties.
Community strings can be configured.
Number of configurable signals per trace exten
ded
3.2 Configuration and operating principle
Where can I find information?
S7-1500R/H System Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/109754833)
STEP 7 online help
Communication Function Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/59192925)
Using the Trace and Logic Ana
lyzer Function Function Manual
(http://support.automation.
siemens.
com/WW/view/en/64897128)
Product overview
11