Siemens SIMATIC S7-200 Manuel - Sayfa 25
Endüstriyel Ekipmanlar Siemens SIMATIC S7-200 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC S7-200 35 sayfaları. Ethernet gateway for simatic mpi/ profibus driver
Ayrıca Siemens SIMATIC S7-200 için: Manuel (30 sayfalar), Sürücü El Kitabı (28 sayfalar), Manuel (49 sayfalar), Manuel (18 sayfalar), Sistem Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Micro Automation Set 14
9.
Ensure that the configuration PC is
connected to WinAC "Backup" via
SCALANCE X108. Load the program to
the WinAC station.
10.
Connect WinAC "Backup" to S7-200
"Basis" via SCALANCE X108.
11.
Restart S7-200 "Basis".
Configuring WinCC flexible "HMI" station
Table 5-8
No.
1.
To ensure the functionality of Micro
Automation Set 14, the following software
must be installed:
•
WinCC flexible 2005 ES with 512
PowerTags Runtime license
2.
The following network settings have to be
applied on the used network card of
WinCC flexible "HMI":
•
IP address:
•
Subnet mask: 255.255.255.0
3.
Select Programs/Settings/ "Set PG/PC
Interface" to set the access point of the
used Ethernet network card to
"S7ONLINE
controller".
V2.0
Entry ID 21062588
Function
192.168.2.142
TCP/IP(Auto) network
05/18/05
Configuration PC
IE cable
WinAC
"
Backup"
IE cable
"
S7-200
Basis"
IE cable
"
WinAC
Backup"
IE cable
Comment
Live Demo
SCALANCE X108
SCALANCE X108
25/35