Siemens Simatic S7-300 Manuel - Sayfa 12

Endüstriyel Ekipmanlar Siemens Simatic S7-300 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens Simatic S7-300 18 sayfaları. Automation systems, controlling a physical axis
Ayrıca Siemens Simatic S7-300 için: Kullanıcı Kılavuzu (34 sayfalar), Manuel (21 sayfalar), Kullanım Talimatları (4 sayfalar), Kullanım Talimatları (5 sayfalar), Manuel (35 sayfalar), Başlarken (8 sayfalar), Başlarken (16 sayfalar), Uygulama Açıklaması (24 sayfalar), Manuel (32 sayfalar), Kurulum ve Donanım Kılavuzu (20 sayfalar), Başlarken (32 sayfalar)

4.2

Setup Items in Offline Mode

• Refer to the Maintenance/Troubleshooting manual for information on how to enter offline

Cf.

 Communication Settings

To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in off-line mode.

Touch the External Device you want to set from the list that appears.

(Page 1/2)

Setup Items

Port No.

Timeout

Retry

Wait To Send

GP-Pro EX Device/PLC Connection Manual

mode or about the operation.

Maintenance/Troubleshooting Manual "Offline Mode"

Enter a port number of the Display, using 1024 to 65535. Check into [Auto], and a port

number is set automatically.

Use an integer from 1 to 127 to enter the time (s) for which Display waits for the response

from External Device.

In case of no response from the External Device, use an integer from 0 to 255 to enter how

many times the Display retransmits the command.

Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving

packets to transmitting next commands.

Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver

Setup Description