Siemens SIMATIC TP900 Comfort INOX PCT Kompakt Kullanım Talimatları - Sayfa 23
Endüstriyel Ekipmanlar Siemens SIMATIC TP900 Comfort INOX PCT için çevrimiçi göz atın veya pdf Kompakt Kullanım Talimatları indirin. Siemens SIMATIC TP900 Comfort INOX PCT 48 sayfaları. Hmi devices; comfort panels
Ayrıca Siemens SIMATIC TP900 Comfort INOX PCT için: Kompakt Kullanım Talimatları (42 sayfalar)
Sayfayı Yazdır
3.2
Inserting the mounting seal
The following figures in this section are examples.
To prevent the mounting seal from being inserted in the wrong direction, it has an
asymmetric coding tap. On all mounting gaskets of the INOX devices, the coding tap is on
the bottom left in relation to the rear of the device.
Note
Use a new mounting seal for each installation, because the promised degree of protection
cannot be guaranteed otherwise.
Procedure
1. Look for the coding tap on the mounting seal. Turn the mounting seal so that the coding
tap is on the bottom left as seen in the figure below:
①
②
③
2. Carefully place the device on the front of the device (interfaces point to you).
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
Coding tap
Positioning hooks
Seal corner
Mounting the device
3.2 Inserting the mounting seal
23