Siemens SINUMERIK 808D Kurulum Kılavuzu - Sayfa 40

Endüstriyel Ekipmanlar Siemens SINUMERIK 808D için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Siemens SINUMERIK 808D 48 sayfaları. Connecting with v60 driver
Ayrıca Siemens SINUMERIK 808D için: Kullanım Talimatları Kılavuzu (34 sayfalar), Servis Kılavuzu (46 sayfalar), Servis Kılavuzu (48 sayfalar), Talimatlar (2 sayfalar)

Sayfayı Yazdır
Siemens SINUMERIK 808D Kurulum Kılavuzu
Connecting

3.4 Connecting the USB interface on the MCP

3.3.14

Slot for the system CompactFlash Card (CF card)

CompactFlash card
The system CompactFlash Card (CF card) has been pre-assembled on the back cover of the
PPU.
①
Note
Do not touch or remove the system CompactFlash Card (CF card) under any conditions!
3.4
Connecting the USB interface on the MCP
The machine control panel MCP is connected to the operator panel PPU via a USB cable.
You can find the USB cable in the MCP package.
Pin assignment
Designation
Type
Cable
Table 3- 15
Illustration
40
Maintenance door
X10
USB socket, type B Combicon 4-pin
Max. length: 0.3m
Pin assignment of X10 (NC)
Pin
Signal name
1
P5_USB0
2
DM_USB0
3
DP_USB0
4
M
②
CF card
Signal type
VO
I/O
I/O
VO
Electrical Installation Manual
Operating Instructions, 12/2014, 6FC5397-2EP10-0BA0
Comment
5V power supply
USB data-
USB data+
Ground