Siemens SINUMERIK 840D sl Devreye Alma Kılavuzu - Sayfa 17

Endüstriyel Ekipmanlar Siemens SINUMERIK 840D sl için çevrimiçi göz atın veya pdf Devreye Alma Kılavuzu indirin. Siemens SINUMERIK 840D sl 36 sayfaları. Operator panel front: op 010s
Ayrıca Siemens SINUMERIK 840D sl için: Yükseltme Talimatları (4 sayfalar), Yükseltme Talimatları (5 sayfalar), Kullanım Kılavuzu (33 sayfalar), Yükseltme Talimatları (3 sayfalar), Yükseltme Talimatları (3 sayfalar), Sistem Kılavuzu (44 sayfalar), Ekipman Kılavuzu (28 sayfalar), Ekipman Kılavuzu (48 sayfalar), Ekipman Kılavuzu (26 sayfalar), Ekipman Kılavuzu (28 sayfalar)

Requirements for the upgrade

3.1

Set up the working environment for the SINUMERIK software update

tool.

The following steps to set up the working environment have to be performed in order to execute

the SINUMERIK Software Update Tool:

● Prepare USB stick with data structure

● Insert the USB stick into the NCU

● Prepare operation with PC mouse

3.2

In order to use the SINUMERIK Software Update Tool, you need a USB stick or a bootable

USB stick (service stick) from which you can execute the tool.

To set up the USB stick, proceed as follows:

1. Format the USB stick to FAT32.

2. Copy the following files to the USB stick:

– Required tools (*.usz files) to the root directory

– NC SW files for a SW update (*.tgz files) to the root directory or to a user-defined

Example of a data structure on a USB stick:

You will find the following data on the USB stick shown as an example:

● Multiple tools (*.usz files)

● Three data backup folders ("CF-...")

● A folder with CNC software, *.tgz file ("CNCSW_STD040703...")

Figure 3-1

SINUMERIK Software Update Tool

Commissioning Manual, 03/2018, A5E42187770B AA

subfolder

Data structure of the USB stick