Cisco WS-C3850-48U-E Ürüne Genel Bakış - Sayfa 12

Anahtar Cisco WS-C3850-48U-E için çevrimiçi göz atın veya pdf Ürüne Genel Bakış indirin. Cisco WS-C3850-48U-E 33 sayfaları. Catalyst 3850 series

LEDs

Network Module

C3850-NM-BLANK

5 All network modules are hot-swappable.

For information about the network modules, see the

see

Cables and

SFP and SFP+ Modules

The SFP and SFP+ modules provide copper or fiber-optic connections to other devices. These transceiver

modules are field-replaceable, and they provide the uplink interfaces (expect in the fixed SFP slots in the

WS-C3850-12S and WS-C3850-24S switches) when installed in an SFP module slot. The SFP modules have

LC connectors for fiber-optic connections or RJ-45 connectors for copper connections.

The downlink ports on the Catalyst WS-C3850-12S and WS-C3850-24S switch models support standard

Note

SFP modules, and the downlink ports on the Catalyst WS-C3850-12XS and WS-C3850-24XS switch

models support standard SFP+ modules.

Use only Cisco SFP and SFP+ modules on the switch. For the latest information about supported SFP and

SFP+ modules, refer to the Cisco Transceiver Modules Compatibility Information at

en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

For information about SFP modules, see the documentation at

The Catalyst 3850 switch supports the SFP module patch cable (CAB-SFP-50CM), a 0.5-meter, copper,

passive cable with SFP module connectors at each end. This cable is only used with 1-Gigabit Ethernet SFP

ports to connect two Catalyst 3850 switches in a cascaded configuration.

For information about QSFP modules, see the documentation at

•

LEDs

You can use the switch LEDs to monitor switch activity and its performance.

Catalyst 3850 switches might have slight cosmetic differences on the bezels.

Note

Catalyst 3850 Switch Hardware Installation Guide

Description

Insert this blank module when the switch has no uplink ports (this is required

for sufficient air flow).

Adapters.

QSFP Port Cabling Specifications

Cisco S-Class 40GBASE QSFP Modules Data Sheet

Installing Network

Modules. For cable specifications,

Installing SFP and SFP+

Product Overview

http://www.cisco.com/

Modules.

OL-26779-05