Siemens SIPLUS CMS4000 IFN VIB-A Kullanım Talimatları Kılavuzu - Sayfa 25
Endüstriyel Ekipmanlar Siemens SIPLUS CMS4000 IFN VIB-A için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIPLUS CMS4000 IFN VIB-A 27 sayfaları. Media converter node
Ayrıca Siemens SIPLUS CMS4000 IFN VIB-A için: Kullanım Talimatları Kılavuzu (39 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar)
Sayfayı Yazdır
Operating Instructions SIPLUS CMS4000 Wiring
6. Slide the sealing insert flush in the cable entry so that the LWL-single connector lays
parallel in the box (in order to avoid a mechanical overload of LWL).
7. Screw the retainer nut tightly onto the cable entry. The recommended torsional mo-
ment is 10Nm.
Picture 25 Completed installation
8. Close the casing cover and screw the 4 included screws (from 1) tight. The recom-
mended torque: 3Nm.
Caution
Only when the installation is correct, the screwcap fits tight and the cover screw fits tight the protection
category IP67 is guaranteed.
Never pull and insert optical fiber, when the ambient temperature is 0° Celsius and below (risk of break-
age).
According to the type of fibre-optic cable an applicable sealing insert must be used.
The included sealing insert is applicable for a twin fibre-optic cable (diameter 3mm).
Notice
The advices for installation that are given by the fibre-optic cable manufacturer must be observed!
SIPLUS CMS4000 Cable
Operating Instructions, 06/2010, A5E02298098A-01
25