Siemens SIREMOBIL Iso-C Bakım Talimatı - Sayfa 33

Endüstriyel Ekipmanlar Siemens SIREMOBIL Iso-C için çevrimiçi göz atın veya pdf Bakım Talimatı indirin. Siemens SIREMOBIL Iso-C 46 sayfaları.
Ayrıca Siemens SIREMOBIL Iso-C için: Kurulum ve Ayar Talimatları (4 sayfalar), Servis Talimatları Kılavuzu (16 sayfalar), Kurulum ve Ayar Talimatları Kılavuzu (6 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Siemens SIREMOBIL Iso-C Bakım Talimatı
Safety Inspection
•
Check the iris collimator and correct it if necessary.
X
- Select the full I.I. format and release fluoroscopy briefly.
- The collimator blades must be clearly visible at the edges of the image.
- Select a zoom format and release fluoroscopy briefly.
- The collimator blades must be clearly visible at the edges of the image.
SIE
Area-dose product measuring device
•
Check the area-dose product measuring device
•
X
(refer to the service instructions for SIREMOBIL ISO-C).
SIE
Codonics printer cable break
•
Inspect all connection lines between the printer and the Framegrabber for damage and
breaks. Inspect the cable routing of the energy chain for damage and proper functional-
ity (ensure that none of the cables are pinched).
3.2.1

Monitor(s)/displays

SIE
Monitor(s)/displays
•
Check the SIMOMED N monitors as prescribed in the checklist.
•
Check the luminance of the standard monitors with 100/120 Hz.
•
Check the luminance of the TFT displays. Check the ambient light sensor.
Siemens AG
Medical Solutions
SPR2-230.101.02.06.02
07.05
Page 33 of 46
CS PS 24
33
SIREMOBIL Iso-C