Digital Extender DD-D12 Kullanıcı Kılavuzu - Sayfa 7

Amplifikatör Digital Extender DD-D12 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digital Extender DD-D12 12 sayfaları. 1x2 dvi distribution amplifier; 1x5 dvi distribution amplifier

Sayfayı Yazdır

Video Connection

1. Connect your video source's DVI output port to the DD-D12/15's DVI
input port using standard DVI cables (not included). Make sure all
your DVI source and the displays are turned off before connecting
the cables.
2. Connect your DVI display's DVI input port to DD-12/15's DVI output
ports. Make sure your DVI display is turned off before connecting the
cables.
3. Plug the 5V power supply into the switch's power input port.
4. Plug the 5V wall mount power supply into the wall outlet.
5. Turn on power switch
6. Turn on your displays.
7. Turn on your video source.
** DDC On/Off Switch
DD-D12/D15 is built in DDC on/off dip switches in the back for each DVI
output port.
DDC communication is required for some video sources and display (such as
PC and LCD monitor) to correctly display the picture. In most cases, you will
not need to change the factory settings,
If when the DDC is turned on for both DVI output channels, some video source
may not work correctly as it sees multiple (conflicting) DDC information.
Please turn on DDC S/W. for the video display you would like the video source
to recognize as the default display and at the same time, turn off DDC for all
other DVI out ports. In such case, other DVI ports will transmit video according
to the default display setting (DVI port with DDC turned on)
*Factory Setting: SW1: On, SW2 ~ SW5: Off
1-5 Video Connection
7