Siemens syngo MR E11 Operatör El Kitabı - Sayfa 23

Endüstriyel Ekipmanlar Siemens syngo MR E11 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Siemens syngo MR E11 40 sayfaları. Mr system
Ayrıca Siemens syngo MR E11 için: Operatör El Kitabı (19 sayfalar)

Sayfayı Yazdır

MAGNETOM Family, Biograph mMR | syngo MR D11, syngo MR D13, syngo MR B19, syngo MR B20P,

syngo MR E11

Print No. MR-06020G.640.08.04.02

Select the values to be changed and enter the new values

described below. The values for frequency and duration are

mandatory. The value for the amplitude is set to this value as a

trade-off between optimal wave propagation and patient comfort.

You have to change the following values:

◾

Frequency:

–

60.1 Hz (Resoundant firmware < 2.0)

–

60.0 Hz (Resoundant firmware 2.0 or higher)

◾

Amplitude: 50 %

◾

Duration: 3 cycles

Click Change to confirm your settings.

Close the web browser and remove the crossover Ethernet cable

from the active driver.

The 60.1 Hz setting is only required for older Resoundant devices

with pre-2.0 firmware (the version is visible on the settings page



in the software, in the lower right area). For devices with

firmware version 2.0 or higher, a frequency of 60.1 Hz may still

work, but 60.0 Hz is smoother. Therefore the 60.0 Hz setting is

recommended for newer versions.

Configuration