Siemens TPS3A09 Kullanıcı Kılavuzu - Sayfa 7

Endüstriyel Ekipmanlar Siemens TPS3A09 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Siemens TPS3A09 8 sayfaları.

Sayfayı Yazdır

NOTICE

CONDUCTING DIELECTRIC AND/OR

HI-POTENTIAL TESTING WILL CAUSE

INTERNAL DAMAGE TO TPS3 UNIT.

Do not perform dielectric or high potential

tests with the TPS3 unit installed.

Maintenance

SPDs require minimal maintenance. Periodic inspection of

diagnostic indicators is recommended to ensure proper operation.

Troubleshooting & Service

Please contact us for any service related issues.

Quality SPDs withstand severe duty and attempt to protect the

load until failure. There are electrical anomalies that SPDs cannot

protect against. These are generally Sustained Overvoltages

also known as Temporary Overvoltages (TOVs). In this context,

Sustained Overvoltages may be only a few cycles. Failed SPDs

tend to be symptoms, not root causes. A failed SPD is usually a

sign of other problems within the electrical distribution system.

As a generalization, the single largest cause of SPD failures is

reference to ground issues. If the SPD shows problems on startup,

there is reasonable chance of bonding/grounding/misapplication

issue. This permanently damages the unit. If not corrected, it will

happen again.

V DANGER

Hazardous voltage.

Will cause death or serious injury.

Keep Out.

Qualified personnel only.

Disconnect and lock off all power before

working on this equipment.

Warranty and Customer Service

Limited Warranty

Siemens warrants its AC Panel protection products against defective

workmanship and materials for 10 years. Liability is limited to the

repair or replacement of the defective product at Siemens' option.

A Return Material Authorization number (RA#) must be given by

the company prior to the return of any product. Returned products

must be sent to the factory with the transportation charges prepaid.

In addition, the company also warranties unlimited replacement

of modular and component parts within the warranty period

previously described.

The company speciﬁcally disclaims all other warranties, expressed

or implied. Additionally, the company is not be responsible for

incidental or consequential damages resulting from any defect

in any product or component thereof.

The sales contract contains the entire obligation of Siemens. This

instruction manual shall not become part of or modify any prior

existing agreement, commitment or relationship.

Technical Support

1.888.333.3545

Prior to calling Siemens TPS3 Technical Support for assistance or

ordering parts, please have the following information available:

TPS3 model number: ________________________________

Manufacture date: _________________________________

Date of Purchase: ___________________________________

Your order number: _______________________________

Return Shipment Address:

Siemens - Attn: RA #___________

14550 58th Street North

Clearwater, FL 33760