Siemens VersiCharge 8EM1310 Series Bağlantı Kılavuzu - Sayfa 27

Endüstriyel Ekipmanlar Siemens VersiCharge 8EM1310 Series için çevrimiçi göz atın veya pdf Bağlantı Kılavuzu indirin. Siemens VersiCharge 8EM1310 Series 31 sayfaları. Ac wallbox iec version

Sayfayı Yazdır

Siemens VersiCharge 8EM1310 Series Bağlantı Kılavuzu

Connecting the VersiCharge AC charging unit to

the Siemens Device Management cloud

5.1

Introduction

The scope of supply of all VersiCharge charging units includes the Siemens Device

Management. It offers remote support and automatic firmware upgrades with the option of

upgrading your charging units depending on your management requirements. If you want to

use this service, you must activate it by creating an account. As soon as you have created the

connection for your VersiCharge device(s), you register the device(s) with the Siemens Device

Management. For a single VersiCharge charging unit, we recommend using the VersiCharge

app on your smartphone. To commission multiple devices, you must use the "VersiCharge

Configurator" tool (see Feasibility (Page 27)).

5.2

Creating an account in the Siemens Device Management

There are two options for creating an account in the Siemens Device Management.

1. For a single VersiCharge charging unit, we recommend using the VersiCharge app on your

smartphone.

2. To commission multiple devices, use the "VersiCharge Configurator" tool. To create the

account during commissioning for the end user (see Feasibility (Page 27))

5.3

Selecting VersiCharge in the app

Five different connection types are offered. The preferred version must be selected:

• WiFi

• Ethernet (automatic setup)

• Ethernet (manual setup)

• SIM card (already registered)

• SIM card (not registered)

Additional information is available here (https://support.industry.siemens.com/cs/us/en/ps).

5.4

Using the charging station in offline mode

If there is no connectivity, the charging station can also work in offline mode.