Siemens 125-5033 Kullanıcı El Kitabı - Sayfa 30

Kontrolör Siemens 125-5033 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Siemens 125-5033 35 sayfaları. Two-state constant volume fume hood controller

Sayfayı Yazdır

Glossary

The glossary contains terms and acronyms that are used in this manual. For definitions of
point database descriptors, see Chapter 3 - Point Database, in this manual. For definitions of
commonly used terms as well as acronyms and abbreviations associated with the APOGEE
Automation System, see the Technical Glossary of Building Controls Terminology and
Acronyms, (125-2185). This book is available from your local Siemens Building
Technologies, Inc. representative.
AI
Analog Input. An AI point is a physical point which accepts a continuous variable signal.
algorithm
Mathematical formula used to calculate an output value using varying inputs.
centralized control
The type of control offered by a controller that is connected, by means of a Floor Level
Network (FLN), with an APOGEE field panel.
control loop
A PID algorithm which is used to control an output based on a setpoint and an input reading
from a sensor.
CV
Constant Volume.
DDC
Direct Digital Control.
DI
Digital Input. A DI point is a physical output point which accepts a two-state signal (that is,
ON/OFF, OPEN/CLOSED, YES/NO, etc.).
DO
Digital Output. A DO point is a physical output point which generates a two-state signal (that
is, ON/OFF, OPEN/CLOSED, YES/NO, etc.).
22
Siemens Building Technologies, Inc.