Samsung 2263DX - SyncMaster - 22" LCD Monitor Kullanıcı Kılavuzu - Sayfa 22

Monitör Samsung 2263DX - SyncMaster - 22" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Samsung 2263DX - SyncMaster - 22" LCD Monitor 25 sayfaları. Quick guide (korean)
Ayrıca Samsung 2263DX - SyncMaster - 22" LCD Monitor için: (İspanyolca) Manual Del Usuario (24 sayfalar), (Korece) Hızlı Kılavuz (24 sayfalar)

Sayfayı Yazdır
Samsung 2263DX - SyncMaster - 22
The screen of the USB monitor freezes.
Q:
Check the "Hardware acceleration" setting for your USB monitor in the "Display Properties"
window.
A:
Set the "Hardware acceleration" value to "Full".
For more information on how to configure the settings, click here.
1.
Right-click the "Windows Desktop" and click on "Properties".
2.
The "Display Properties" window appears.
Select the "Settings" tab and click on "Advanced".
3.
If the "Properties" window for your monitor is displayed, select the "Troubleshoot" tab.
Move the "Hardware acceleration" slide to "Full".
My USB monitor is connected but the screen is blank.
Q:
Does the Auto Installation program run when your USB monitor is connected?
A:
Install the "USB Monitor Driver" from the provided CD. For more information on how to install
the driver, refer to "Installing and Using the Software".
I have connected the USB monitor but it does not boot up...
Q:
For the One-Board Type computer which uses an i815 chipset motherboard, change the Legacy
USB support option to [Disabled] in the BIOS Setup menu and reboot the computer.
A:
(Example) Phoenix BIOS
If you turn on the computer, the "Press F2 to enter SETUP" message is displayed on the bottom
of the screen. Press [F2] to display the BIOS Setup menu.
A:
- Configuring the Settings
Set the Advanced -> Peripheral Configuration (Integrated Peripherals) -> Legacy USB Support
item to [Enabled]. Save the settings and reboot the computer.
A:
- Entering the BIOS Setup screen may differ for each BIOS company. Refer to the user manual
for your PC.
For more information, visit the Microsoft website.
My computer is on and the LED is blinking. However, only a blank screen is dis-
played on the monitor.
Q:
Check whether your computer is in hibernation mode (The monitor turns off).
A:
Move your mouse or press any key to display the screen again.

Check the following items if there is trouble with the monitor.

Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)
driver and the monitor driver.
Troubleshooting