Digital Foci MCG-150 Kullanıcı Kılavuzu - Sayfa 2
Kart Okuyucu Digital Foci MCG-150 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digital Foci MCG-150 2 sayfaları. Usb 2.0 multi-format memory card reader / writer
Ayrıca Digital Foci MCG-150 için: Ürün Özellikleri (1 sayfalar)
Sayfayı YazdırConnecting your Memory Card Gateway
Connect Memory Card Gateway to your computer with the included USB cable.
Once connected, the Power LED will turn red to indicate that the device is receiving
power and ready to use. Your computer will automatically* install 5 Removable Disks,
for each the 5 memory card slots.
For Windows: 5 Removable Disks will be shown under My Computer
For Mac: 5 Removable Disks will be created on the Desktop
The Removable Disks will be listed in the following sequence:
(Actual drive letters may vary)
(g:) SD Card / SDHC / MMC / RS-MMC
(h:) CompactFlash / MicroDrive
(i:) SmartMedia / xD-Picture Card
(j:) Memory Stick / MS PRO / MS Duo / MS PRO Duo
(k:) microSD / microMMC / TransFlash
* NOTE: Driver installation required for Windows 98SE and Mac 9.x.
Drivers can be downloaded at www.digitalfoci.com/support.
Inserting Memory Cards
Memory Card Gateway has 5 card slots that allow you to simultaneously
access and transfer data between the 5 card slots* and your computer.
*EXCEPTION: SD/MMC and microSD/MMCmicro cannot be used simultaneously.
Each card slot is designed to support a specific series of memory card formats.
Front View
CompactFlash/
MicroDrive
(1)
CF/MD
SM/xD
(2)
xD/SmartMedia
Each memory card should be inserted as described below:
(1) CF/MD: Insert the card label side facing up.
(2) xD/SmartMedia: Insert the card with gold connector side facing up.
*For xD, position the card against the left side of the slot.
(3) SD/miniSD/MMC/RS-MMC: Insert the card with label side facing up.
*For miniSD, position the card in the middle of the slot.
(4) MicroSD/MMCmicro : Insert the card with label side facing up.
*For MicroSD/TransFlash, position against the right side of the slot.
*For MMCmicro, position the card against the left side of the slot.
(5) MS/MS Duo: Insert the card with label side facing up.
*Also supports MS M2 (MS Micro) card with adapter.
Back View
SD/SDHC/
microSD/
MMC/RS-MMC
MMCmicro
(3)
(4)
microSD/MMCmicro
SD/mininSD/MMC/RS-MMC
MS/MS Duo
(5)
MS/MS Duo
LED Indicators
Memory Card Gateway has 2 LED indicators:
Power LED:
- When the device is plugged in and receiving power, the Powe LED
will turn red.
Card Access LED:
- When a memory card is inserted,
the Card Access LED will turn green.
- When data is being accessed on or
written to a memory card, the Card
Access LED will flash until the
operation is complete.
Warning: DO NOT remove memory cards or unplug the device
while the Card Access LED is flashing. Removing memory cards or
unplugging the device during data transmission may crash your
computer and cause you to lose valuable data.
Accessing Files with Memory Card Gateway
After inserting a memory card into its proper slot, the device will allow you to access the
contents of that memory card just as you would access the contents of the hard disk
drive on your computer. You can use it in the same way that you use the hard disk
drive to move, copy, edit, view, and delete files.
Safely Removing Memory Cards
Before removing memory cards from the device, make sure that there is no data being
written to or read from the memory card. Follow these instructions to safely remove
your memory cards:
For Windows: From Windows Explorer, right click on the icon of the card to be removed
and select 'Eject'.
For Mac: On the Desktop, drag and drop the corresponding disk icon into the Trash Can.
Icon Utility
(Windows Only)
The Icon Utility program replaces the generic
removable disk icons and labels on your
computer with descriptive icons and labels
for each of the 5 card slots as illustrated here.
When a memory card is inserted successfully, the
corresponding memory icon will be shown in
color. The other memory card slots will have
picture icons displayed in black and white.
You can download the Icon Utility driver at our
website at: www.digitalfoci.com/support.
Power
Card Access
LED
LED
USB
USB Port
Version 3.0