Samsung 403 Series Hızlı Kurulum Kılavuzu - Sayfa 2
Monitör Samsung 403 Series için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Samsung 403 Series 2 sayfaları. 4 series; 5 series
Ayrıca Samsung 403 Series için: Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (49 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), E-Manuel (32 sayfalar)
Sayfayı Yazdır
Basic Functions
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specifi c
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIZE
button on your remote. The fi rst time
you press it, your TV displays the current setting. Thereafter, each time you press
the
P.SIZE
button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen
Zoom 1
Zoom 2
Wide Fit
4:3 Standard screen
Screen Fit
Screen Fit displays a full HD picture covering the entire screen with no cutoff
on any side. It is only available when your TV inputs an HDMI (720p, 1080i,
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
Remote Control Buttons and Functions:
Turns the TV on and off.
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Adjust the volume.
Displays the channel list on the screen.
View the
Media
Play.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items and
change menu settings.
Return to the previous menu.
Colored buttons for use in the
Channel List, Media Play
menu, etc.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specifi c conditions.
The Picture Modes are listed and described in the table below:
Mode
Description
Brightens picture. For a vibrant, enhanced image in brightly lit or
Dynamic
sunny room.
Standard
For a bright, detailed picture in a normally lit room.
Movie
For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1.
With the TV on, press the
TOOLS
button on your remote.
The Tools menu appears.
2.
Using the ▲ or ▼ on your remote, select Picture mode.
On the Picture Mode menu, use the ◄ or ► on your remote to select
3.
the Picture Mode you want.
4.
Press the
EXIT
button to exit the menu.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1.
With the power on, press the
MENU
button
on your remote. The main menu appears.
MEDIA.P
The menu's left side has the following menu
options: Picture, Sound, Channel, Setup,
Input, Application, and Support.
2.
Press the ▲ or ▼ button on your remote to
select a menu option, and then press the
ENTERE
button.
3.
When done using the menu, press the
EXIT
button on your remote to exit.
A
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Display the main on-screen menu.
MEDIA.P
FAV.CH
Display favorite channel lists on the screen.
Press to display information on the TV screen.
Exit the menu.
A
B
C
D
MTS: Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
P.SIZE: Picture size selection.
CC: Controls the caption decoder.
Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/
DVD player, a cable/satellite box, antenna or a
cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through the
Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the
SOURCE
you press the
SOURCE
button, you change to a different source.
Changing Channels and Adjusting the Volume
Volume
MEDIA.P
SLEEP
Adjust the volume by pressing the
y
button on the remote.
MENU
Setting the Clock
A
B
C
D
FAV.CH
Before you can use your TV's On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1.
Turn on your TV.
2.
Using your remote, press the
MENU
button on your remote.
Then, select Setup → Time.
Select Clock Mode, and then
3.
press the
ENTERE
button.
Set Clock Mode to Auto or
B
C
D
Manual.
Select Auto if you have a
digital channel in your area
and are not using a cable/sat box.
4.
Select Clock Set, and then press the
ENTERE
appears.
5.
Using the number buttons on your remote, enter the Month, Day, Year, Hour,
and Minute. Use the ◄ or ► button to move between entry fi elds.
6.
Press the
RETURN
button on your remote when done.
English - 2
Connecting a USB Device for Media Play
You can enjoy photo and music fi les stored on a USB device
by connecting it to the TV and using the Media Play feature.
To connect a USB device for Media Play, follow these steps:
button on your remote. Each time
Turn on your TV.
1.
2.
Connect a USB device containing
photo and music fi les to the
jack on the rear of the TV.
3.
When the Application selection
Channel
screen appears, press the
ENTERE
button on your remote
MEDIA.P
SLEEP
to select Media Play (USB).
MEDIA.P
SLEEP
Change the channels by pressing
the
z
button on the remote.
If your TV is attached to a cable or
satellite box, change the channel
using the box's remote.
A
B
C
D
A
B
C
D
Clock Set
Month
Day
Year
--
----
--
Hour
Minute
am/pm
--
--
--
L Move
Adjust E Enter R Return
U
button. The Clock Set screen
TV Rear Panel
USB Drive
USB
L
Move
Enter
R
Return
E
BN68-03810A-00
BN68-03810A