Samsung 460UXN-UD2 Hızlı Başlangıç Kılavuzu - Sayfa 22

Monitör Samsung 460UXN-UD2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Samsung 460UXN-UD2 26 sayfaları. Quick guide (korean)
Ayrıca Samsung 460UXN-UD2 için: Hızlı Başlangıç Kılavuzu (29 sayfalar), (Hızlı Başlangıç Kılavuzu (26 sayfalar), (Korece) Hızlı Başlangıç Kılavuzu (24 sayfalar)

Sayfayı Yazdır
Samsung 460UXN-UD2 Hızlı Başlangıç Kılavuzu
A:
Check if the signal cable between the computer and the LCD Display is securely con-
nected.
(Refer to Connecting a Computer)
Q:
Shadowiness on the fringe of the panel due to technical limitations.
A:
The slight shadowiness on the fringe of the panel is due to the inside sheet that is seen
through the thin outer bezel, which is not a defect but a technical limitation for the panel
in the slim bezel design.

Problems related to the Screen

Note
Problems related to the LCD Display screen and their solutions are listed.
Q:
The screen is blank and the power indicator is off.
A:
Ensure that the power cord is firmly connected and the LCD Display is on.
(Refer to the Connecting a Computer)
Q:
"Check Signal Cable" message.
A:
Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to the Connecting a Computer)
A:
Ensure that the PC or video sources are turned on.
Q:
"Not Optimum Mode" message.
A:
Check the maximum resolution and the frequency of the video Adaptor.
A:
Compare these values with the data in the Preset Timing Modes Chart.
Q:
The picture rolls vertically.
A:
Check if the signal cable is securely connected. Re-connect it, if necessary.
(Refer to Connecting a Computer)
Q:
The image is not clear; picture is blurred.
A:
Run Frequency Coarse and Fine tuning.
A:
Turn on again after removing all accessories (video extension cable, etc.)
A:
Set the resolution and frequency to the recommended ranges.
Q:
The picture image is unstable and shakes.
A:
Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q:
Ghost images are shown in the picture.
A:
Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Troubleshooting
75