Samsung 5 Series Kullanıcı Kılavuzu - Sayfa 16

Sayfayı Yazdır

Size



You can select the picture size which best corresponds to your viewing requirements.

You can select these options by simply pressing the P.SIZE button on the remote control.

●

Auto Wide: Automatically adjusts the picture size to the : aspect ratio. (New Zealand, Singapore only)

●

:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

●

Wide Zoom: Magnify the size of the picture more than 4:3.

●

Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

●

4:: This is the default setting for a video movie or normal broadcasting.

●

Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i

/ 1080p) signals are input.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

In PC Mode, only : and 4: mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

Wide Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the

screen up / down. Then press the ENTERE button.

Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture

up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press

the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.

After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or

► button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.

If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan

function.

Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3 (New Zealand, Singapore only)



When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS

(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is

intended for users to select it.

●

:: Sets the picture to 16:9 wide mode.

●

Wide Zoom: Magnify the size of the picture more than 4:3.

●

Zoom: Magnify the size of the picture vertically on screen.

●

4:: Sets the picture to 4:3 normal mode.

This function is available in Auto Wide mode.

This function is not available in PC, Component or HDMI mode.

Digital NR → Off / Low / Medium / High / Auto



If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMI Black Level → Normal / Low



You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

Film Mode → Off / Auto1 / Auto2



The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, AV1, AV2, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).

Film Mode is not supported in DTV channel with resolution 576p/720p.

Blue Only Mode → Off / On

■

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green

signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such

as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to

the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an

additional Blue Filter.

Blue Only Mode is available when the picture mode is set to Movie or Standard.

Picture Reset → Reset Picture Mode / Cancel

❑

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

[550_Aus]BN68-01895D-02Eng.indb 14

English - 4

2009-09-16

11:12:44