Cisco 522 Manuel - Sayfa 8
IP Telefon Cisco 522 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 522 40 sayfaları. Ip phones with multiplatform firmware
Ayrıca Cisco 522 için: Kullanıcı Kılavuzu (46 sayfalar), Yönetim Kılavuzu (48 sayfalar), Kurulum Kılavuzu (39 sayfalar), Manuel (24 sayfalar)
Sayfayı Yazdır
Cisco Headset 561 and 562 Buttons and LED
The following table describes the Cisco Headset 561 and 562 Headset buttons.
Table 4: Cisco Headset 561 and 562 Headset Buttons
Number
Name
1
Power and Call button
2
Mute button
3
Volume button
4
LED
Headsets
8
Description
Use to power the headset on and off.
Press and hold for 4 seconds to power on and off the headset.
Incoming and active call management depends upon if you have
one call or multiple calls.
One call:
• Press once to answer incoming calls.
• Press once to put an active call on hold. Press again to
retrieve a call from hold.
• Press twice to reject an incoming call.
• Press and hold to end an active call.
Multiple calls:
• Press once to put an active call on hold, and to answer a
second incoming call.
• Press once to put a current call on hold. Press again to resume
a call, or press and hold for 2 seconds to end the current call
and to resume a held call.
• Press and hold to end an active call, and to answer another
incoming call.
• Press twice to stay on a current call, and to reject a second
incoming call.
Toggle the microphone on and off. The Mute
lights when Mute on the headset is enabled.
Adjust the volume on your headset.
Shows the headset status:
• Blinking red—Incoming call.
• Steady red—Active call.
• Blinking white—Firmware upgrade is in progress.
Headsets
on the phone