Cisco 6800 Series Hızlı Başlangıç Kılavuzu

IP Telefon Cisco 6800 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 6800 Series 2 sayfaları. Ip phone, multiplatform phones
Ayrıca Cisco 6800 Series için: Hızlı Başlangıç Kılavuzu (3 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Bakım Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Sorun Giderme Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Donanım Kurulumu (20 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Cisco 6800 Series Hızlı Başlangıç Kılavuzu
Your Handset
1
2
3
6
6
4
5
Legend
Indicator light (LED)
Emergency button
Headset port
Softkeys, phone control buttons (Speaker, Menu),
Navigation cluster (Navigation ring and Select button,
call control buttons (Answer/Send, Power/End)
Keypad
Volume and Mute buttons
Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Cisco IP DECT 6800 Series Quick Start Guide
Turn On Your Handset
1
2
Press and hold Power/End
Turn Off Your Handset
3
Press and hold Power/End
Lock the Handset Keypad
4
When the keypad is locked, you can only dial
Note:
emergency numbers.
5
Press and hold Zero (0)
"Press and hold 0" is displayed on the screen.
Unlock the Handset Keypad
Press and hold Zero (0)
"Press and hold 0" doesn't display on the screen.
Make a Call
1.
When your handset is idle, enter the phone number
with the keypad. To start the number with plus (+),
press and hold Asterisk
displays on the screen.
2.
Press Answer/Send
Report an Emergency Situation
(If configured)
until the screen turns on.
Press and hold Emergency
Answer a Call
until the screen turns off.
Press Answer/Send
Hold and Resume a Call
1.
2.
until the message
Mute Your Call
1.
2.
until the message
Create a Conference Call
1.
2.
3.
until the +
Transfer a Call
.
1.
2.
3.
for 3 seconds.
.
From an active call, press Hold.
Press Resume to pick the call back up.
Press Mute
.
To unmute yourself, press Mute again.
From an active call, press Conf.
Enter the coworker's number and press
Answer/Send
.
Press Conf after the coworker answers.
From an active call, press Transfer.
Enter the coworker's number and press
Answer/Send
.
Press Transfer before or after the coworker answers.
January 2020