Cisco 6825 Hızlı Başlangıç Kılavuzu

IP Telefon Cisco 6825 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 6825 2 sayfaları. Ip dect handset
Ayrıca Cisco 6825 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Your Handset
1
2
3
6
6
4
5
Legend
Indicator light (LED)
Emergency button
Headset port
Softkeys, phone control buttons (Speaker, Menu),
Navigation cluster (Navigation ring and Select button,
call control buttons (Answer/Send, Power/End)
Keypad
Volume and Mute buttons
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
Cisco IP DECT 6825 Handset Quick Start Guide
Turn On Your Handset
1
2
Press and hold Power/End
Turn Off Your Handset
3
Press and hold Power/End
Lock the Handset Keypad
4
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label doesn't display when you lock
5
the keypad.
Press and hold Zero (0)
"Press and hold 0" is displayed on the screen.
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear..
Press and hold Zero (0)
"Press and hold 0" doesn't display on the screen.
Make a Call
1.
When your handset is idle, enter the phone number
with the keypad.
2.
Press Answer/Send
Report an Emergency Situation
(If configured)
until the screen turns on.
Press and hold Emergency
Answer a Call
until the screen turns off.
Press Answer/Send
Hold and Resume a Call
1.
2.
Mute Your Call
until the message
1.
2.
Create a Conference Call
1.
2.
until the message
3.
Transfer a Call Directly
1.
• 6825 Handset: Press Transfer.
• 6823 Handset: Press More > Transfer.
2.
.
for 3 seconds.
.
From an active call, press Hold.
Press Resume to pick the call back up.
Press Mute
.
To unmute yourself, press Mute again.
From an active call, press Conf.
Enter the coworker's number and press
Answer/Send
.
Press Conf after the coworker answers.
From an active call,
Enter the coworker's number and press Answer/
Send
.
September 2020