Cisco 6901 Standard Yönetim Kılavuzu - Sayfa 10
IP Telefon Cisco 6901 Standard için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 6901 Standard 12 sayfaları. Unified ip phone
Ayrıca Cisco 6901 Standard için: Veri Sayfası (5 sayfalar), Yönetim Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (50 sayfalar), Manuel (10 sayfalar), Manuel (28 sayfalar)
Sayfayı Yazdır
Cisco Unified Communications Manager Phone Addition
Cisco Unified Communications Manager Phone Addition
You can add phones individually to the Cisco Unified Communications Manager database using
Cisco Unified Communications Manager administration. To do so, you first obtain the MAC address for each
phone.
For information about determining a MAC address, see
on page
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration, choose
Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager, see
the "Cisco Unified Communications Manager Overview" chapter in the Cisco Unified Communications
Manager System Guide.
Add Phones Using BAT Phone Template
The Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform batch
operations, including registration, on multiple phones. To access BAT, choose Bulk Administration in
Cisco Unified Communications Manager Administration,
To add phones by using BAT only (not in conjunction with TAPS), you must obtain the appropriate MAC
address for each phone.
For information about determining a MAC address, see
on page
For detailed instructions about adding phones using the Bulk Administration menu, see the Cisco Unified
Communications Manager Bulk Administration Guide, chapter "Inserting Phones".
To add a phone to the Cisco Unified Communications Manager using the BAT phone template, perform these
steps:
Procedure
Step 1
From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone Template.
Step 2
Click Add New.
Step 3
Choose a Phone Type and click Next.
Step 4
Enter the details of phone specific parameters, including Device Pool, Phone Button Template, and Device
Security Profile.
Step 5
Click Save.
Step 6
From Cisco Unified Communications Manager, choose Device > Phone > Add New to add a phone using
an existing BAT phone template.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
10
12.
12.
Cisco Unified IP Phone and Telephony Networks
Cisco Unified IP Phone MAC Address Determination,
Cisco Unified IP Phone MAC Address Determination,