Epson 740c - PowerLite XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 5

Projektör Epson 740c - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 740c - PowerLite XGA LCD Projector 14 sayfaları. Product support bulletin(s)
Ayrıca Epson 740c - PowerLite XGA LCD Projector için: Parça Listesi (1 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Güncelleme Kılavuzu (1 sayfalar), Kurulum Kılavuzu (19 sayfalar), Teknik Özet (7 sayfalar), Ürün Destek Bülteni (15 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar)

Sayfayı Yazdır

Epson 740c - PowerLite XGA LCD Projector Kullanıcı Kılavuzu

Selecting the Image Source

If multiple devices are connected to the projector, the easiest

way to select the image source is to press the

the remote control or the

Source Search

projector until the correct image is projected.

You can also press one of the following buttons on the

remote control:

to select the device connected to the projector's

Computer

Computer/Component Video

to select the device connected to the

S-Video

port.

S-Video

button to select the device connected to the

Video

port.

Video

After you select a source, the screen goes dark for a moment

before the image appears.

Note:

The PowerLite740c does not support the

Adjusting the Image

Once you see your image, you may need to make certain

adjustments, as described in this section.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

Rotate the zoom ring to reduce or enlarge the image.

button on

button on the

port.

button.

EasyMP

Focus ring

Zoom ring

Epson PowerLite 740c Projector

You can also change the image size by moving the projector

closer to or farther away from the screen. You can use the

buttons on the remote control to zoom in on a portion

E-Zoom

of the image. See "Zooming Your Image" on page 8 for

instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the

projector's front adjustable foot.

1. Stand behind the projector. Press up on the blue foot release

lever and lift the front of the projector to extend the front

adjustable foot.

2. Once the image is positioned where you want it, release the

lever to lock the foot in position.

3. If the projector isn't level, rotate the

back foot on the back of the

projector.

If the image is no longer rectangular after

raising it, see the next section.

8/04

Epson PowerLite 740c Projector