Epson 740c - PowerLite XGA LCD Projector Kurulum Kılavuzu - Sayfa 18

Projektör Epson 740c - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson 740c - PowerLite XGA LCD Projector 19 sayfaları. Product support bulletin(s)
Ayrıca Epson 740c - PowerLite XGA LCD Projector için: Parça Listesi (1 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Güncelleme Kılavuzu (1 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Teknik Özet (7 sayfalar), Ürün Destek Bülteni (15 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar)

Sayfayı Yazdır
Epson 740c - PowerLite XGA LCD Projector Kurulum Kılavuzu
ELPMBUNI

Final Adjustments

1.
With the projector secured in the mount and power on and signal supplied to the projector you can now
proceed with the final height, tilt, and roll and yaw to optimize the projected image.
2.
The height can be adjusted by slightly loosening the two 8mm height adjustment screws and raising or
lowering the projector (Figure 14).
3.
Once the height is achieved tighten the two screws.
4.
To adjust the tilt angle of the projector, slightly loosen the side M8 screws and tilt to the desired angle to
the screen and firmly tighten the two M8 tilt adjustment screws (Figure 15).
5.
If roll adjustment is needed to square the images on the screen, slightly loosen the front and rear M8
screws and adjust to the desired angle then firmly tighten the two M8 roll adjustment screws (Figure 16).
(Roll) Adjusting
Screws
Allen Wrench
Installation Manual
Wood Stud
Allen Wrench
Figure 14
Figure 15
Figure 16
Ceiling
Height Adjustable
Screws
Wood Stud
Ceiling
Tilt Adjusting Screws
Allen Wrench
Wood Stud
Ceiling
Page - 19 -